Unassembled FTC (Fluorescent Tube Cover) rocket parts kit. FTC tube is NOT included. FTC tubes can be found at most home center / hardware stores or search online for "fluorescent bulb guard" for T12 size bulb (OD diameter 1 5/8 inch / 42mm). Or buy on Amazon at the links below:
48" Fluorescent Tube Cover (FTC) Red, T12
https://amzn.to/3bhCJrU
48" Fluorescent Tube Cover (FTC) Blue, T12
https://amzn.to/3czZ4Bk
Loctite 1451588 PL Premium Polyurethane Adhesive, 4 oz
https://amzn.to/3BhFgNo
Araldite Heavy Duty 2-Part Epoxy Adhesive
https://amzn.to/3NdUJ6H
FTC tubes are available in 4 ft. and 8 ft. lengths usually clear acrylic, but they can be painted. All the other parts needed to build an FTC rocket are contained in this kit. Loctite PL 3X Premium Polyurethane Adhesive or a 2 part epoxy are required for assembly. Watch video below for comprehensive assembly, configuration, and launch instructions.
FTC Rocket Parts Kit includes:
- 2 x StratoCap - FTC Endcap
- 1 x StratoCone Mini 3D Print
- 1 x Rail Guides
- 1 x StratoFins
- 1 x Nozzle
- 1 x Square Ring
FTC Rocket Benefits:
- Requires no additional nose cone
- More aerodynamic than a 2-liter bottle because it is narrower
- Amount of water used can be varied a lot without adverse launching results
- Not easily blown off a field due to wind since it is skinny
- Back gliding recovery (descends on its side and requires no parachute)
- 2 full proof methods for deploying a parachute
- Screw an expansion chamber on top to increase volume
- Screw a payload container on top for CanSat or other application
WARNING: Acrylic FTC tubes will only contain 120 PSI safely. Polycarbonate FTC tubes will contain 145 PSI safely.
